SANSI 45W Motion Sensor Security Light 6000LM Dusk to Dawn Flood Lights Outdoor

Description

Four Kinds of Working Modes:
TEST MODE
Set-up:
Put the "Mode" switch in the Test position.
Function:
The light turns on for only 5 seconds during daytime or night once it detects motion.
This mode is used for checking whether the sensor is working properly.
Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn't work while using this mode.
AUTO MODE
Set-up:
Put the "Mode" switch in the Auto position.
Function:
When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime.
Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode.
ON-TIME MODE
Set-up:
Put the "Mode" switch in the On-Time position.
Function:
Light can work as a standard LED light without motion sensing.
The light turns on when switched on, and turns off when switch off.
On-Time Mode can work during the daytime and night. The Lux, Time, and Range Setting doesn't work while using this mode.
DUSK TO DAWN MODE
Set-up:
Put the "Mode" switch in the D2D position.
Function:
The light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor.
D2D Mode only works at night. When it's bright around the sensor, it goes off automatically. Except for Lux, Time and Range don't work while using this mode.
------ Three Setting Knobs ------
Stand By Time
Time knob is used for setting working time from 1-10 minutes when it detects motion.
Time setting only works in Auto Mode.
Sensor Sensitivity
For setting ambient brightness value to differ from daytime tonight. If the ambient brightness value exceeds the setting Lux, it is defined as "daytime"; otherwise it's known as "nighttime".
Position 0 equals 3 Lux, Position ∞ equals max Lux and it's always regarded as night no matter how bright around the sensor.
Lux setting only works in Auto Mode and D2D Mode.
Detecting Range
Rotate the knob to adjust the sensing range to max ca. 50ft motion coverage.
When you mount the light over 7.8ft, please adjust the sensor upwards and set the max range to increase the coverage area. Time setting only works in Auto Mode.
Range setting only works in Test Mode and Auto Mode.
Attention
Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
Make sure that there are no other influence factors that affect the performance of light.
Be sure to disconnect the power before you install the light.
Be sure to mount it in a dry location, humid environment is not good for light's lifespan.
Smart IC
SANSI Independent design
Auto power adjustment
More safety
PC+Ceramics
High light efficiency
Super-Long lifespan
Better heat dissipation
Sensor Sensitivity
LUX: 0-∞ LUX
Time:1-10 minutes
Range:0-72 ft
SANSI LED Security Lights Outdoor, Motion Sensor
FloodLight,
45W
(600W Equiv.) 6000LM, Super Brightness, Dust to
Dawn Function
with Wide Angle
Illumination, Waterproof,5000K
Daylight,
4 Modes and 3 Settings
, ETL Certification, Classical White
Motion Sensor Lights
- The outdoor led flood lights are equipped with a strong motion sensor
which has a highly sensitive sensing angle of 180 degrees
and a long sensitive distance of 50 feet.
This light can sense people, animals
, people in cars, etc, perfectly as outdoor lighting for the safety
of your family.
Super Bright & Larger Lighting Area
- The 45W security light can produce up to 6000lm ultra-bright,
using exclusive lens sealing technology to ensure a focused
and brighter output. The lighting direction
is adjustable.
Two flexible light heads can easily move upwards, downwards and horizontally, up to
270 degree. One SANSI light
is equivalent to a floodlight, a motion sensor light, even a wall lamp.
Soffit Mount & 4 Working Modes
- This light can be both soffits mounted and surface mounted.
It can be installed horizontally by adjusting the light heads. This LED
motion sensor light supports
4 working modes:
Auto Mode, On-Time Mode, Dusk to Dawn Mode and Test Mode to meet your
different needs.
Easy Installation & All Weather Resistant
-This LED outdoor security light can be installed by
mounting to a wall and following a few simple wiring steps. IP65 waterproof
design ensures safety
for outdoor use
protecting lamps from rain, dust, and snow. Perfect lighting solution for driveway,
garage, deck area, stairways, and decks, along with walking
paths, and certain areas of your backyard.
High Quality & 5-year Warranty
-Adopt patented ceramic heat dissipation technology(CHDT),
this exterior Light has a longer lifespan than regular lights. All SANSI products
include a full 5-year
warranty, unconditional
30-day refund or replacement, and free lifetime technical support, you can
surely buy with confidence.
On Sep 29, 2022 at 22:28:33 PDT, seller added the following information: