SANSI 15W Motion Sensor LED Security Lights Dusk to Dawn Flood Lights Outdoor

Description

SANSI LED Security Lights Motion Sensor Light Outdoor, Dusk to Dawn
Flood Light Outdoor,
15W 2000lm 5000K Motion Light, IP65 Waterproof Motion
Sensor Flood Light Exterior Light, White
New Version & New Features
: New Version LED security lights for 2020 are built with high-quality motion sensors
that have a higher sensing angle of 180 degrees and max sensitive distance of 50 feet. 4 working modes (Test, Auto,
D2D and On-Time modes) can meet different demands and are perfect for replacing your old flood lights.
Super Bright & Wide Coverage
: This 15W motion sensor light can produce up to 2,000 lumens, which provides
efficient lighting for your exterior living environment. SANSI exclusive lens sealing technology to ensure a focused
and brighter output. Two light heads can easily upwards, downwards and horizontally adjusted, up to 270 degrees.
Only one light is enough for your home security.
Motion Sensor & Dusk to Dawn
: D2D features auto-on at dusk and auto-off at dawn to meet the customer's requirement
who wants the light to stay on all night. AUTO (motion sensor) mode will light up the light when motion detected in the
sensor coverage, such as people, little animals and cars.
4 MODES CONTROL
: With the most used AUTO Motion Sensor Mode, This light also provided 3 other mode for different demand; Dusk to Dawn Mode :Auto turn on at dusk and turn off at dawn; On-Time Mode: Manual control lights keep ON by switch; Test Mode:Detect ambient motion to turn on the light for 5 seconds.
Easy Installation & IP65 Waterproof
: SANSI outdoor motion sensor light can be both soffit mounted and wall mounted.
IP65 waterproof ensures that your outdoor security light fixture can withstand rain, sleet or snow.
High Quality & 5-Year Warranty
: Adopt patented ceramic heat dissipation technology(CHDT), this exterior Light has a
longer lifespan than 50,000 hours. It is also covered with a 5-year warranty, so welcome to contact us if you have any
questions and we will assist you 24/7.
PACKAGE INCLUDED:
1 * SANSI LED Security Light
1 * Bar-shaped Mounting Plate
1 * Waterproof Gasket and 3 x Screws
3 * Wire Connectors
1 * Mounting Bolt
1 * Rubber Screw Plug
1 * Instruction Booklet
Dusk to Dawn MODE
Put the "Mode" switch in the D2D position.
Function:
The light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor.
D2D Mode only works at night. When it's bright around the sensor, it goes off automatically. Except for Lux, Time and Range don't work while using this mode.
TEST MODE
Set-up:
Put the "Mode" switch at the Test position.
Function:
The light turns on for only 5 seconds during daytime or night once it detects motion.
This mode is used for checking whether the sensor is working properly.
Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn't work while using this mode.
AUTO MODE
Put the "Mode" switch at the Auto position.
Function:
When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime.
Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode.
ON-TIME MODE
Set-up:
Put the "Mode" switch at the On-Time position.
Function:
Light can work as a standard LED light without motion sensing.
The light turns on when switched on, turns off when switch off.
On-Time Mode can work during the daytime and night. The Lux, Time, and Range Setting doesn't work while using this mode.
Stand By Time
Time knob is used for setting working time from 1-10 minutes when it detects motion.
Time setting only works in Auto Mode.
Sensor Sensitivity
For setting ambient brightness value to differ from daytime tonight. If the ambient brightness value exceeds the setting Lux, it is defined as "daytime"; otherwise it's known as "nighttime".
Position 0 equals 3 Lux, Position ∞ equals max Lux and it's always regarded as night no matter how bright around the sensor.
Lux setting only works in Auto Mode and D2D Mode.
Detecting Range
Rotate the knob to adjust the sensing range to max ca. 50ft motion coverage.
When you mount the light over 7.8ft, please adjust the sensor upwards and set the max range to increase the coverage area. Time setting only works in Auto Mode.
Range setting only works in Test Mode and Auto Mode.
Attention
Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
Make sure that there are no other influence factors that affect the performance of light.
Be sure to disconnect the power before you install the light.
Be sure to mount it in a dry location, humid environment is not good for light's lifespan.
Adjustable Lighting Angle-Can Be Mounted Horizontally
180° Motion Detection Angle
Max 50ft Sensing Range
Adjustable Lighting Time (1-10 Minutes)
IP65 Waterproof Auto Motion Sensor Light
2000 Lumen Super Bright LED Security Light
Dusk to Dawn LED Outdoor Lighting
On Sep 29, 2022 at 22:36:38 PDT, seller added the following information: