Magnum D.I. Inject Gun and Proseal XL4 1.5 ton Direct Inject for Auto #9880

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Magnum D.I. Inject Gun and Proseal XL4 1.5 ton Direct Inject for Auto #9880
Leak Stop
Magnum D.I. Inject allows you to install any Enviro-Safe Direct Inject product into your automobile with the same tool in a matter of seconds.
This tool allows you to install the Direct Inject into all systems, even if the system is empty or full of product.
Kit #9880 includes:
1 Magnum D.I. Inject Gun
1 Proseal XL4, Good For Systems uo to 1.5 tons Inject hose
2 Disposable CO2 cartridges
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject is a small, concentrated, easy inject refrigerant leak sealant.
Good for systems up to 1.5 tons.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effec- tive at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedius, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
Designed to repair minor leaks in the evaporator, condenser, connecting fittings and metal lines. ProSeal was designed​ to save the consumer the burden of costly repairs in the form of replacement parts and expensive service labor. A mobile A/C refrigeration sealer for metal components, for mobile A/C refrigeration systems.
Do NOT use in ammonia systems!
We are a Certified UPS Hazardous Materials Shipper for the United States and Canada.
This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR.
Leak Stop Magnum D.I. Inject allows you to install any Enviro-Safe Direct Inject product into your automobile with the same tool in a matter of seconds. This tool allows you to install the Direct Inject into all systems, even if the system is empty or full of product. Kit #9880 includes: 1 Magnum D.I. Inject Gun 1 Proseal XL4, Good For Systems uo to 1.5 tons Inject hose 2 Disposable CO2 cartridges One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject is a small, concentrated, easy inject refrigerant leak sealant. Good for systems up to 1.5 tons. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effec- tive at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedius, and time consuming process of "pumping down the unit". Simply Connect and Inject. Enviro-Safe's ProSeal XL4 Inject is: --- Concentrated --- Compatible with all refrigerant, except ammonia --- Compatible with all oils --- No need to pump down R410, or other units --- Large equipment, bulky tools, injection hoses are a thing of the past For Use In: --- heat pumps --- split systems & mini split units --- packaged units --- microchannel coils Designed to repair minor leaks in the evaporator, condenser, connecting fittings and metal lines. ProSeal was designed​ to save the consumer the burden of costly repairs in the form of replacement parts and expensive service labor. A mobile A/C refrigeration sealer for metal components, for mobile A/C refrigeration systems. Do NOT use in ammonia systems!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Magnum D.I. Inject Gun and Proseal XL4 1.5 ton Direct Inject for Auto #9880
Leak Stop
Magnum D.I. Inject allows you to install any Enviro-Safe Direct Inject product into your automobile with the same tool in a matter of seconds.
This tool allows you to install the Direct Inject into all systems, even if the system is empty or full of product.
Kit #9880 includes:
1 Magnum D.I. Inject Gun
1 Proseal XL4, Good For Systems uo to 1.5 tons Inject hose
2 Disposable CO2 cartridges
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject is a small, concentrated, easy inject refrigerant leak sealant.
Good for systems up to 1.5 tons.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effec- tive at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedius, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
Designed to repair minor leaks in the evaporator, condenser, connecting fittings and metal lines. ProSeal was designed​ to save the consumer the burden of costly repairs in the form of replacement parts and expensive service labor. A mobile A/C refrigeration sealer for metal components, for mobile A/C refrigeration systems.
Do NOT use in ammonia systems!
We are a Certified UPS Hazardous Materials Shipper for the United States and Canada.
This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR.
Leak Stop
Magnum D.I. Inject allows you to install any Enviro-Safe Direct Inject product into your automobile with the same tool in a matter of seconds.
This tool allows you to install the Direct Inject into all systems, even if the system is empty or full of product.
Kit #9880 includes:
1 Magnum D.I. Inject Gun
1 Proseal XL4, Good For Systems uo to 1.5 tons Inject hose
2 Disposable CO2 cartridges
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject is a small, concentrated, easy inject refrigerant leak sealant.
Good for systems up to 1.5 tons.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effec- tive at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedius, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
Designed to repair minor leaks in the evaporator, condenser, connecting fittings and metal lines. ProSeal was designed​ to save the consumer the burden of costly repairs in the form of replacement parts and expensive service labor. A mobile A/C refrigeration sealer for metal components, for mobile A/C refrigeration systems.
Do NOT use in ammonia systems!