EASY SEAL PRO SEAL XL4 Auto Direct Inject Treats 1.5 to 5 Ton System Leak Sealer

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
EASY SEAL PRO SEAL XL4 Auto Direct Inject Treats 1.5 to 5 Ton System Leak Sealer
ProSeal XL4 Inject For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5
Envirosafe
Direct Inject (goes on the end of your hose and the system connection)
Refrigerant Leak Sealant
Super Concentrate
Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's
Concentrated
Reinforced clear hose
Easy product injecting viewing (you know its going in!!)
Easiest Sealant to Install
Permanent Seal
Works with All Refrigerants (excluding ammonia)
Professional Use Only
1/4" male Flare fitting inlet
1/4' Female flare swivel with valve core depressor outlet or system connection.
System pump down not required
Good for R410a systems
One time use!
Directions on back of box.
One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units.
Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
micro-channel coils
We are a Certified UPS Hazardous Materials Shipper for the United States and Canada.
This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR.
ProSeal XL4 Inject For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4" male Flare fitting inlet 1/4' Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of "pumping down the unit". Simply Connect and Inject. Enviro-Safe's ProSeal XL4 Inject is: ---Concentrated ---Compatible with all refrigerant, except ammonia ---Compatible with all oils ---No need to pump down R410, or other units ---Large equipment, bulky tools, injection hoses are a thing of the past For Use In: ---heat pumps ---split systems & mini split units ---packaged units ---micro-channel coils
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
EASY SEAL PRO SEAL XL4 Auto Direct Inject Treats 1.5 to 5 Ton System Leak Sealer
ProSeal XL4 Inject For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5
Envirosafe
Direct Inject (goes on the end of your hose and the system connection)
Refrigerant Leak Sealant
Super Concentrate
Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's
Concentrated
Reinforced clear hose
Easy product injecting viewing (you know its going in!!)
Easiest Sealant to Install
Permanent Seal
Works with All Refrigerants (excluding ammonia)
Professional Use Only
1/4" male Flare fitting inlet
1/4' Female flare swivel with valve core depressor outlet or system connection.
System pump down not required
Good for R410a systems
One time use!
Directions on back of box.
One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units.
Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
micro-channel coils
We are a Certified UPS Hazardous Materials Shipper for the United States and Canada.
This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR.
ProSeal XL4 Inject For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5
Envirosafe
Direct Inject (goes on the end of your hose and the system connection)
Refrigerant Leak Sealant
Super Concentrate
Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's
Concentrated
Reinforced clear hose
Easy product injecting viewing (you know its going in!!)
Easiest Sealant to Install
Permanent Seal
Works with All Refrigerants (excluding ammonia)
Professional Use Only
1/4" male Flare fitting inlet
1/4' Female flare swivel with valve core depressor outlet or system connection.
System pump down not required
Good for R410a systems
One time use!
Directions on back of box.
One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units.
Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
micro-channel coils